Send SMS
Home » Products » Fire Protection Products » Fire Barrier Silicone Sealants and Foam

Fire Barrier Silicone Sealants and Foam

Fire Barrier Silicone Sealants and Foam
Fire Barrier Silicone Sealants and Foam
Send Inquiry
Product Code : 11
Product Description

With an aim to offer quality assured products, we are engaged in supplying Fire Barrier Silicone Sealants. These offered sealants are helpful to avert the spread of toxic fumes, fires, smoke and moisture. These sealants have gained high demands from our clients for their resistance against rust and high temperature. Our vendors’ formulate these sealants using chemical compounds and other materials in tandem with international quality standards. We offer these Fire Barrier Silicone Sealants in various quantities to meet the diverse demands of our clients.


  • Weatherproof
  • Moisture proof
  • Excellent sound barrier properties

Other info:

3M Fire Barrier Silicone Sealants and Foam

A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
3M silicone sealants (one-part, ready-to-use elastomers) and RTV foam (two-part, liquid-silicone elastomer) share these properties:
Good for both joint and through-penetration applications.
Re-enterable/ repairable.
Excellent weatheribility and sound-barrier properties.
Cure upon exposure to atmospheric humidity.

3M Fire Barrier 2000 Silicone Sealant

Premium sealant available in nonslump formula.
Great for top-of-wall/ head-of-wall joints.
Accommodates vibration from normal building movement.
Maximum pipe size of 24 inches (609mm).
Compression/ extension recovery of Ãâہ¡ÃƒÆ’‚±31% of original joint width.

3M Fire Barrier 2000+ Silicone Sealant
A premium nonslump sealant bonds to most common construction materials to form a flexible seal. This product is great for through penetrations and may also be used for fire rated construction joints. Ready-to-use, gun-grade, one component silicone elastomer that cures upon exposure to atmospheric humidity to form a flexible seal. Provides up to a four-hour fire-rating.
Superior adhesion.
Remains elastomeric and is weather resistant.
Provides up to a four-hour fire rating.
Compression/ extension recovery of Ãâہ¡ÃƒÆ’‚±15% of original joint width.

3M Fire Block Sealant FB 136
3M  Fire Block Sealant FB 136, a one component, water-based, non-combustible draft, smoke and fireblocking sealant, designed to resist high temperatures and smoke passage in non-rated construction.
3M Fire Block Sealant FB 136 meets ASTM E-136, current 2003 International Building Code (IBC), 2003 International Residential Code (IRC), 2003 International Residential Mechanical Code, 2003 International Fuel Gas Code and NFPA 5000 draft, smoke and fireblocking requirements.
No special handling, routine disposal.
Easy clean up with water.
Thixotropic: Will not sag or run in vertical or overhead applications.
Tack free in approximately 15 minutes.
Gray color
High caulk rate.
Applications: Use 3M Fire Block Sealant FB 136 to seal interior construction voids around wires, pipes, HVAC ducts and vents, in wood or steel framed non-rated construction. May also be used around chimney, fireplace and other framing gaps. Not for exterior use.

3M Fire Barrier 2001 Silicone RTV Foam
2001 Silicone RTV Foam is a medium-density, two-part silicone elastomer supplied as A and B liquid components designed for use as a fire, smoke, noxious gas and water sealant (two-part, liquid-silicone elastomer that foams in place when mixed). 2001 Silicone RTV Foam is designed to seal large and/or complex penetrations.
Cures in 1-5 minutes to form an elastomeric compression seal.
Firestops and seals large and complex penetrations.
No ampacity derating of cables when used properly.
Easily mixed by hand (small amounts) or by automated mixing and dispensing equipment (large amounts).
Re-enterable/ repairable.




Back to top